CareersNewsEvents
Home Our CompanyProducts And SystemsService And SupportInvestor RelationsContact Us
  Home > Product Catalog > Government > SAT-2100B
 printable view
Browse by:

Search by:
    Product Index
Product Catalog - Government
Air Transport  | Business and Regional  | Government  | Service and Support

SAT-2100B
Satellite Communications Systems

KEY FEATURES/USER BENEFITS

  • Three LRUs make up this System
  • An 8 MCU SRT-2100B SATCOM receiver / transmitter weighing only 13.1 kg.
  • Provides three classic Aero H, H+, or I channels for voice, facsimile and low-speed PC data over the entire surface of the earth, except for polar regions.
  • High-integrity communications for aircraft crew and cabin passengers with ICAO safety services compliance such as routine and emergency ATC/AOC communications.
  • Four integral DTMF analog ports and multichannel digital telephone bus (CEPT-E1) for maximum flexibility, with or without a cabin telephone distribution system.
  • Capable of interfacing with any Inmarsat-approved high-gain antenna system.
  • 45 Watt high power amplifier output simultaneously supports all Aero and two Swift64 channels or two SwiftBroadband channels.
  • Enables up to two simultaneous channels of Swift64 or SwiftBroadband service using optional companion HST-2110B high-speed data SATCOM transceivers.
  • A 2 MCU HST-2110B equipped with ISDN, ISDN over Ethernet, Ethernet and RS-232 for maximum operator flexibility.
  • And a small HCM-2100B Identity Module.

OVERVIEW

The Collins SRT-2100B is a compact lightweight and economic satellite communications offering. The SRT-2100B incorporates the traditional functions of the high-power amplifier (HPA), radio frequency unit (RFU) and satellite data unit (SDU) within a single 8 MCU package. It operates multi-channel voice, facsimile and low-speed PC data capability. The SRT-2100B also enables up to two simultaneous Swift64 or SwiftBroadband channels using its HST-2110B and HCM-2100B companions. Using its ARINC 741 electrical interface, the SRT-2100B interfaces with all industry standard high-gain antenna systems.


DESCRIPTION

The SRT-2100B Satellite Receiver/Transmitter houses the radio frequency unit, satellite data unit and high-power amplifier. Novel management software monitors and controls the power between the Aero and Swift Services to ensure safety services integrity.

The HST-2110B enables Inmarsat's Swift64 service providing bi-directional 64 kbps packet data and up to 432 kbps SwiftBroadband service enabling services such as internet and e-mail access.

The HCM-2100 houses the USIM identity cards which allows the HST to log into the SwiftBroadband network. A single HCM-2100B is all this is required to support up to two HST-2100B USIM cards.


OPERATION AND PERFORMANCE

The SRT-2100B operates using the Inmarsat constellation of geosynchronous communications satellites to enable Aero-H, Aero-H+, Swift64 and SwiftBroadband services. Ground earth stations provide links to the public switched telephone network for bidirectional calling, facsimile and data communications.

The SRT-2100B operates with three Aero channel modules. The SRT-2100Bs architecture allows it to operate in the event of a channel module failure, capable of voice, fax and PC data operation, by removing the failed module from the channel module pool and engaging other modules. A single operational module will support essential data communications such as ACARS or AFIS. Additionally, up to two simultaneous channels of Swift64 or SwiftBroadband service can also be operated using the companion HST-2110B.

The Inmarsat network is suitable for air traffic services that enable the SAT-2100B to provide access to FANS services for preferred airspace routing and clearances in oceanic regions.


TYPICAL SYSTEM

SAT-2100B
SAT-2100B
 
Type
 
Quantity
 
Description
 
Part Number
 
SRT-2100B 
Receiver/Transmitter-3 Channel
 
822-1785-001 
HST-2110B 
1 or 2
 
High-speed data SATCOM transceiver
 
822-2232-020 
HCM-2100B 
High-speed Configuration Module
 
822-2248-001 

Note(s):
See Installation Hardware table for mounts and converters
Also required, but not supplied:
  • Mounts with cooling air provisions
  • Cabin telephone equipment as required
 

Specifications
Certification
 
 
 
SRT-2100B
 
HST-2110B
 
HCM-2100B
 
FAA PMA
 
   
Environmental
 
DO-160D
DO-160D C4PBA[BD][SB] EXXXXX AAAAZ[RRR]M [A3E3]XXA
 
DO-160D
A4C4/YBAB/SB/ EXXXFXAEAEZ /RRR/M/A3E3/XXA
 
DO-160D
A4C4/YBAB/SB/ EXXXFXAEAEZ /RRR/M/A3E3/XXA
 
EUROCAE
 
ED-14C
 
ED-14C
 
ED-14C
 
Physical Characteristics
 
 
 
SRT-2100B
 
HST-2110B
 
HCM-2100B
 
Height
 
198.0 mm (7.807 in) max
 
199.39 mm (7.85in) max
 
25.4 mm (1.0 in) max
 
Width
 
260.86 mm (10.27in) max
 
59.69 mm (2.35in) max
 
101.6 mm (4.0 in) max
 
Length
 
322.58 mm (12.70 in) max
 
369.06 mm (14.53 in) max
 
114.3 mm (4.5 in) max
 
Weight (max)
 
13.1 kg (28.9 lb)
 
3.99 kg (8.8 lb)
 
0.34 kg (0.75 lb)
 
Cooling
 
Forced air - 50 kg/hr at 40°C max
Pressure drop 6.35± 1.27 mm H20
 
Forced air optimal
 
Passivel
 
Mounting Information
 
8MCU per ARINC 600-8
 
2MCU
 
SCM Form Factor
 
Environmental
 
 
 
SRT-2100B
 
HST-2110B
 
HCM-2100B
 
Temperature
 
-40 to +70°C
 
-40 to +70°C
 
-40 to +70°C
 
Altitude
 
55,000 ft
 
55,000 ft
 
55,000 ft
 
Power Requirements
 
 
 
SRT-2100B
 
HST-2110B
 
HCM-2100B
 
 
115 AC 324 - 800 Hz (395 W max) or 28 V DC
 
115 V AC 324 - 800 Hz
 
Powered via HST-2110B interface
 
 
430 VA max
 
41 W max
 
Included in HST total
 
Performance Characteristics
 
 
 
SRT-2100B
 
HST-2110B
 
HCM-2100B
 
 
Three channels
 
Bi-directional 64 kb/s service. Circuit mode via ISDN port or Ethernet port. Packet data via Ethernet port. Background and Streaming Class SwiftBroadband services via Ethernet port.
 
Contains up to two USIM cards used for identifying the HST to the SwiftBroadband network.
 
 
Digital Voice, fax and data
 
 
Up to four DTMF analog ports
 
 

SELECTION GUIDE

Receiver/Transmitter
 
Type
 
Number of Channels
 
Part Number
 
SRT-2100B 
3
 
822-1785-001 

INSTALLATION HARDWARE

Installation Hardware
 
SRT-2100B
 
Type
 
Quantity
 
Description
 
Part Number
 
 
1
 
8MCU ARINC 600-8
 
Purchase from vendor 
 
1
 
Connector
 
859-3477-360 
 
140
 
#22 pin
 
370-0066-060 
 
7
 
#12 socket
 
370-0066-090 
 
2
 
#20 socket
 
370-0066-070 
 
2
 
Size 1 pin
 
370-0066-210 
 
2
 
Size 5 pin
 
370-0055-060 
HST-2110B
 
Type
 
Quantity
 
Description
 
Part Number
 
 
2
 
Splitter/Combiner
 
850-0009-010 
 
1
 
2 MCU ARINC 600-8
 
Purchase from vendor 
 
1
 
Connector
 
859-3477-020 
 
60
 
#22 pin
 
370-0066-060 
 
2
 
#5 Socket
 
370-0055-060 
 
1
 
#12 Socket
 
370-0066-090 
 
2
 
#16 Socket
 
370-0066-080 
HCM-2100B
 
Type
 
Quantity
 
Description
 
Part Number
 
TBD
 
1
 
Hosts the USIM card which retains the aircraft parameters such as ICAO address. It remains with the aircraft in the event of maintenance and is approximately 4inx3inX1.2in. The HCM is only required for SwiftBroadband, not Swift64.
 
822-2248-001 

SUPPORT OFFERINGS

Product Information Material is available at no charge and can be obtained by contacting GS Customer Relations:

Phone: 800-321-2223 or (319) 295-5100
Fax: (319) 295-4777