• 2 to 18 GHz broadband or band segments
• Matched cable (up to 50') and amplifier
• Correct for the negative gain slope of long coaxial cable runs
• Low noise figure, 6 dB typical
• 0 dBm third order IP typical
• Increases system dynamic range
• Small size, 2"H x 3"W x 0.5"D nominal
• 0 to 50 degrees C operating temperature

• Model C through I for different band segments from .01 to 18 GHz
• 4 or 8 outputs
• 70 dB typical output to output isolation
• 90 dB typical output to input isolation
• 10 dB maximum noise figure
• 0 dBm, 1 dB compression point, typical
• +7 dBm typical third order IP
• 0 dB, ±3 dB gain
• 1U, half-rack chassis

• 1 Input and 16 outputs
• Single-slot VXI package
• 50 kHz to 1 GHz frequency range
• SMA RF connectors
• 10 dB noise figure
• High dynamic range
• Optional units available for coverage up to 3 GHz

When placing an order, please specify the exact model and options. Each unit is supplied with a power cord, a manual including an interface command dictionary (ICD), a certificate of conformance, and acceptance test data.

All exports of the hardware and/or software referenced in this datasheet require a United States Department of State Export License, or exemption as regulated by the International Traffic in Arms Regulations (ITAR).

All units are warranted for a period of one year against manufacturing defects in materials or workmanship, provided that the unit is returned to the manufacturer's designated facility. This warranty is specifically limited to the repair or replacement of the unit, and does not include liability for consequential damages or physical damage caused by other parties.

Rockwell Collins reserves the right to change the features and/or specifications of the equipment described in this document at any time without notice.

Product information material is

Phone: 972.705.1438
Fax: 972.705.1436
Email: <ewsigint@rockwellcollins.com>
Website: http://www.rockwellcollins.com/ewsigint