COMINT - ELINT, Search and Set-on Applications

High performance, multi-role receiver with build-in Display Digitizer

Descriptive:High performance super-heterodyne receiver for advanced signal detection and processing of Comm and non-comm signals. Built-in display for real-time situational awareness.

• Certified to process high interest signals
• Operates independently or part of a COMINT or ELINT system
• Spectral, SDU/PAN, or Channalized display capability
• Half-rack 2U ruggidized design, 90-260VAC, 47-440Hz

Installed on various airborne, land, and sea going platforms

COMINT - ELINT, Search and Set-on Applications

High performance, flexible, and value for multi-mission roles

Descriptive:High performance super-heterodyne receiver for advanced signal detection and processing of Comm and non-comm signals.

• Certified to process high interest signals
• Operates independently or part of a COMINT or ELINT system
• Full front-panel controls and remote interfacing
• Half-rack 2U ruggidized design, 90-260VAC, 47-440Hz

Installed on various airborne, land, and naval platforms

• Three (3) slot-wide VXI module
• High dynamic range
• 0.5 to 18 GHz standard frequency range
• Extension option down to 100 MHz and up to 20+ GHz
• Low phase noise, <0.5 Degrees RMS
• Search/set-on modes with auto-stop
• COMINT/ELINT applications
• 70/140/160 MHz and 1 GHz/500 MHz BW IF outputs
• Millimeter wave extenders available contact factory for frequencies over 40 GHz
• Front panel LED status display
• Contact factory for other available frequencies

Descriptive:High performance super-heterodyne receiver with 2GHz of IF bandwidth for advanced signal detection and processing of Comm and non-comm signals.

• Ultra-wide IF at 2GHz bandwidth, centered at 3GHz
• Operates independently or part of a SIGINT system
• Filtering is optimized for low group delay and minimal ripple
• Low noise figure and high dynamic range

Installed on various airborne, land, and naval platforms

• Separate synthesizer and RF/IF converter modules (2-slot wide synthesizer and 3-slot wide tuner)
• Amplitude and phase matched channels
• Dual phase coherent channel operation
• High dynamic range
• 1 GHz/500 MHz BW or 480 MHz/250 MHz BW IF's
• Optional 140/85, 160/85 and 70/50 MHz Bandwidth IF's
• 2 to 18 GHz frequency range, option down to 0.5 GHz
• Chebychev or Gaussian IF filter selection for COMINT or ELINT applications
• Designed for airborne and shipboard installations
• 'N' channel configuration available

• 0.5 TO 18 GHz coverage standard
• Optional gain & phase matched channels
• High dynamic range
• 1 GHz & 160 MHz IF outputs
• Low phase noise & group delay
• 100 Hz tuning resolution
• COMINT/ELINT applications

COMINT - ELINT, Search and Set-on Applications

VME Based - High performance, multi-role receiver

Descriptive:High performance 2-slot VME super-heterodyne receiver for advanced signal detection and processing of Comm and non-comm signals.

• Certified to process high interest ELINT signals
• Operates independently or part of a COMINT or ELINT system
• Switched filters for front-end pre-selection
• Low noise figure and high dynamic range

Installed on various airborne, land, and naval platforms

• 0.5 to 18 GHz coverage standard
• Amplitude and phase matched channels
• Dual channel receiver using common LO for phase coherence
• Frequency extensions down to 100 MHz and up to 20+ GHz
• Housed in 2U, full-rack chassis
• Front panel and RS-232 or ethernet remote control
• 1 GHz and 160 MHz IF outputs
• I&Q outputs with 100 MHz BW
• High dynamic range
• LOG video outputs
• AGC/MGC with 50 dB gain control
• Contact factory for other available frequencies

• High Instantaneous Dynamic Range, 95 dB typically
• Fast tuning synthesizer
• Low integrated phase noise <0.85 degrees rms
• 1 GHz @ 500 MHz BW & 160 MHz @ 70 MHz
• Log video outputs
• Supports N-channel DF applications
• Convection or conduction cooled
• Contact factory for details at (319) 295-3665

When placing an order, please specify the exact model and options. Each unit is supplied with a power cord, a manual including an interface command dictionary (ICD), a certificate of conformance, and acceptance test data

All exports of the hardware and/or software referenced in this data sheet require a United States Department of State Export License, or exemption as regulated by the International Traffic in Arms Regulations (ITAR).

All units are warranted for a period of one year against manufacturing defects in materials or workmanship, provided that the unit is returned to the manufacturer’s designated facility. This warranty is specifically limited to the repair or replacement of the unit, and does not include liability for consequential damages or physical damage caused by other parties.

Rockwell Collins reserves the right to change the features and/or specifications of the equipment described in this document at any time without notice.

Product Information Material is available and can be obtained by contacting GS Customer Relations:

Phone: 972.705.1438
Fax: 972.705.1436
Email: <ewsigint@rockwellcollins.com>
Website: http://www.rockwellcollins.com/ewsigint