|
CS-1024 IF-TO-BASEBAND CONVERTER
Standard 70 MHz IF input Options for 21.4, 70, 140, 160 MHz and 1 GHz IF input Very low differential group delay Up to 5 standard bandwidths from 2 to 40 MHz Optional BW's down to 250 kHz and Up to 80 MHz 75 dB AGC/MGC gain control range 1U, full-rack chassis Front panel and RS-232 remote control Perfect match for new wideband analog recorders
CS-1095 IF TO BASEBAND CONVERTERS
SIGINT, Search and Set-on ApplicationsDSP technology for high performance baseband conversion
Descriptive:High performance IF to
Baseband converter that is small and lightweight that translates intermediate
frequencies down to analog and/or digital baseband outputs.
Features:
Two modes of operation - Analog / Digital Operates independently or part of a SIGINT or frequency monitoring
system Standard 70MHz input or optional inputs from 21.4MHz to 1.0GHz Full-rack 1U ruggidized design, 90-260VAC, 47-440Hz
Specifications
Equipment list
Installed on various airborne, land, and sea going platforms
ORDERING INFORMATION
When placing an order, please specify the exact model and options. Each
unit is supplied with a power cord, a manual including an interface command
dictionary (ICD), a certificate of conformance, and acceptance test data. All exports of the hardware and/or software referenced in this datasheet
require a United States Department of State Export License, or exemption as
regulated by the International Traffic in Arms Regulations (ITAR).
WARRANTY
All units are warranted for a period of one year against manufacturing
defects in materials or workmanship, provided that the unit is returned to
the manufacturer's designated facility. This warranty is specifically limited
to the repair or replacement of the unit, and does not include liability for
consequential damages or physical damage caused by other parties. Rockwell Collins reserves the right to change the features and/or specifications
of the equipment described in this document at any time without notice.
PRODUCT INFORMATION MATERIAL
Product Information Material is available and can be obtained by contacting
GS Customer Relations:
Phone: 972.705.1438
Fax: 972.705.1436
Email: <ewsigint@rockwellcollins.com>
Website: http://www.rockwellcollins.com/ewsigint
|
