|
KEY FEATURES/USER BENEFITS
 Click to Enlarge
USAF Standard HF Radio High Frequency Data Link (HFDL) per ARINC 635 Automatic Link Establishment Compatible per MIL-STD-188-141A,
Appendix A
OVERVIEW
AN/ARC-190(V) Aircraft Communications System
The ARC-190 system is designed for use in various military airborne
applications that employ probe/cap, shunt or wire antennas. It is automatically
tuned in both the receive and transmit mode. Built-in test equipment (BITE)
and modular construction provide for rapid fault isolation to the box and
module level for quick repair. The AN/ARC-190 is the mainstay of HF communications
in the U.S. Air Force having been installed in a large variety of fixed and
rotary wing aircraft, such as the C-130, C-20, KC-135, C-141, C-5, C-9, KC-10, B-1,
B-52, C-17, E-3, E-4, E-8, F-15, F-16, H-53, H-60, S-2T.
HFDL Upgrade
The HFDL mode provides worldwide-automated data communications directly
between aircraft systems and the ARINC ground network. HFDL is part of the
Aeronautical Telecommunication Network (ATN) and supports a wide variety of
data applications.
The HFDL configuration of the AN/ARC-190 consists of an RT-1341(V)8
Receiver Transmitter and a CP-2024C Automatic Communications Processor. Upgrade
kits are available for both the RT and Processor to upgrade prior versions
of these equipments to the HFDL configuration.
TYPICAL SYSTEM
The Basic AN/ARC-190 System With ALE on 1553 BUS (Embedded HFDL Modem)
RT-1341(V)8 | Receiver-Transmitter | 622-5985-001 | Various
(see above) | Coupler | Various (see above) | CP-2024C | Adaptive Processor | 622-9746-102 | MT-6142A | RT
Mount | 622-5369-002 | MT-6515 | Adaptive Processor Mount | 622-7328-002 |
SELECTION GUIDE
AN/ARC-190(V) & HF-190 Receiver-Transmitters
RT-1341(V)8 | Receiver-Transmitter, HF,
Microprocessor control, 400 watt, compatible with automatic communications
processor - Anti-Jam (ACP-AS), 1553 bus interface, ARINC 714 SELCAL
output, carbon MIL, and 600 OHM audio | 622-5985-001 | (V)8
Mod Kit | This Mod Kit converts a (V)3 or (V)5 R/T to a (V)8
R/T. | 752-5559-001 |
Receiver-Transmitter Mounts
MT-6142 | Mount, for RT-1341(V) without
vibration isolators. Has integral cooling fan. | 622-5369-001 | MT-6142A/993S-1 | Mount,
same as -001 status except with vibration isolators. TSO approved. | 622-5369-002 | 993S-7/MT-6604 | Mount, for RT-1341(V) for
use with aircraft supplied cooling air. | 622-7186-001 | 993S-8/MT-6532 | Mount,
for RT-1341(V), for use on the RF-4(C). | 622-7235-002 | 993S-9/MT-6536 | Mount, for RT-1341(V), used
in retrofitting of 618T-2( ) installations. Connectors for secure voice, auto
communications processor and F-1535 bandpass filter - low
side rails for easy RT install. | 622-7355-002 | 993S-10/MT-6534 | Mount,
for RT-1341(V) for use in ground, shipboard, maintenance trainer and shop
applications. Features one phase, low speed "quiet" blower motor
for sea-level applications only. | 622-7670-001 | 993S-11/MT-6537 | Retrofit Mount 618T-2, similar
to MT-6536 without provisions for F-1535 bandpass filter, with high side rails. | 622-8067-001 | MT-6479 | Mount,
for RT-1341(V). Has automatic air shutoff valve when RT is removed. | 622-6552-001 | 993S-22 | Mount, for RT-1341(V) for use on the
C-130J. | 822-0958-001 |
Antenna Couplers
*CU-2275(V)1/490A-1 | Coupler, antenna (cap/probe).
Microprocessor controlled, pressurized for high altitude operations. TSO approved. | 622-4731-001 | *CU-2275(V)2/490A-2 | Coupler, antenna (long-wire).
TSO approved. | 622-6129-001 | CU-2314A(V)4/490S-4 | Coupler,
digital dual shunt. TSO approved (KC-10, C-17, C-130, G-III, G-IV, KC-135
GATM). | 622-7375-003 | Note(s): | Installing more than
one wire or probe coupler on same aircraft requires external circuits to protect
transceiver from damaging RF receive levels. Use either bandpass filters or
antenna grounding hardware. |
|
Coupler Mounts and Feedline Kits & Retrofit Kits
MT-6533/790S-9 | Mount, coupler for use with
the CU-2314(V)2.For use on RF-4( ). | 622-7891-001 | MT-6480/790S-10 | Mount,
for 490S-4 dual installations. 79OS-10 is TSO approved. For use on C-130 aircraft
with shunt antenna. | 622-7377-001 | 790S-11 | Mount, for 490S-4 dual installations
with 599H-5 feedline. TSO approved (Gulfstream IV with HF-190). | 622-7824-001 | 790S-12 | Mount,
for 490S-4 single installations. | 622-7825-001 | 790S-13 | Mount, for 490S-4 single
installations with 599H-5 feedline. Used on C-20B. | 622-7826-001 | 790S-20 | Mount,
for CU-2275(V)1/2 and 490A-5, low profile, non-isolated. | 622-8965-001 | 790S-20 | Mount, same as -001 status
except has vibration isolators. | 622-8965-002 | MT-6141 | Mount,
for CU-2275(V)1/2/4/5 and 490A-5. | 622-5371-001 | MT-6231 | Mount, for CU-2275(V)2 and
490A-5. | 622-6264-001 | MT-6369 | Mount,
for CU-2275(V)3 coupler on C-5A/B. | 622-6985-001 | MT-6370 | Mount, for CU-2314(V)2 coupler
on F-15. | 652-6646-001 | MT-6478 | Mount,
for CU-2314(V)2 coupler on F-16. | 622-7705-001 | MT-6535/993S-14 | Mount, coupler for use with
the CU-2275(V)2. No isolators. Adapts to various EMI shields. Typical application:
C-130 with wire antennas. | 622-8379-001 | NTN | Mount,
coupler B-lB/H-60. | 652-2199-001 | CG-3882/599J-10 | Feedline, H-60. | 622-8623-001 | CG-3857 | Feedline,
for use on F-15. | 622-7686-001 | CG-3861 | Feedline, for use on F-16. | 622-7687-001 | CG-3875 | Feedline,
for use on the RF-4(C). | 659-9779-001 | NTN | Mount and feedline kit,
dual coupler, for use on 727 aircraft. | 685-0467-002 | NTN | Mount
and feedline kit, single coupler, for use on 727 aircraft. | 685-0468-002 | NTN | Mount and feedline kit,
single coupler, for use on 737 aircraft. | 685-1202-001 | 993S-20 | Mount,
coupler, universal. Has capability of being installed where not necessary
to connect to rf output connector. | 622-9652-001 | 993S-20 w/feedline | Includes feedline adapter
kit. Many various ways to install feedline, for different applications. | 651-4693-001 | NTN | Retrofit
/ Installation kit for conversion of C-130 aircraft with 618T and wire antennas
to ARC-190. Does not include RT and coupler mounts. | 651-7483-001 |
ALE/SELCALl/HFDL Options
C-11814 | Control, radio set, half
size, aircraft panel mounted, ANVIS green lighting. | 622-7119-001 | CP-2024A | Embedded ARINC 714 SELCAL® decoder
and is used with RT-1341(V)8 for 1553 Applications. | 622-9746-103 | CP-2024C | Same
as CP-2024A except has embedded HFDL capability | 622-9746-102 | CP-2024B | Same as CP-2024A w/o ECCM. | 822-1482-001 | 309P-2 | Commercial
version of the CP-2024C w/o ECCM | 822-1510-001 | HFDL Mod Kit | Modification kit to convert CP-2024B to 309 P-2. | 987-4656-001 | HFDL
Mod Kit | Modification kit to convert CP-2024A to CP-2024C | 988-8042-001 | 994C-1 | Mount, 1/2-ATR short, hard
base for 309L-4 and 309M-1. | 622-6883-001 | 994C-1 | Mount,
1/2-ATR short, isolated base for 309L-4 and 309M-1. | 622-6883-002 | 994C-3/MT-6514 | Mount, 1/2-ATR long, hard
base for CP-2024. | 622-7328-001 | 994C-3/MT-6515 | Mount,
1/2-ATR long, isolated base for CP-2024. | 622-7328-002 |
Mating Connectors
NTN | Connector kit, for single
system. Includes mating connectors for control, RT, RT mount, and antenna
coupler (no ALE connectors) . Includes straight strain reliefs. Consult listing
for other connector combinations. | 659-1367-001 | NTN | Connector,
J-1 rear mating for C-10828(V) 514A12, 514A13, C-11814 or 514A-8 (strain relief
required). | 359-0645-520 | NTN | Strain relief, straight,
for connector J-1 listed above (359-0645-520). | 359-0637-050 | NTN | Strain
relief, right angle, for connector J-1 listed above (359-0645-520). | 359-0637-150 | NTN | Connector, J-1 mating for
RT-1341(V)3; RT-1341(V)4, RT-1341(V)5, RT-1341(V)6, RT-1341(V)7, RT-1341(V)8
or 728U-2 (strain relief required). | 359-0645-190 | NTN | Strain
relief, J-1 connector for all RT-1341(V) or 728U-2, straight. | 359-0637-060 | NTN | Strain relief, J-1 connector
for all RT-1341(V) or 728U-2, right angle. | 359-0637-160 | NTN | Connector,
J-2 mating for all RT-1341(V) except (V)4(J-2 is part of MT-6142/ A, 993S-2
and 993S-10. J-2 only required if MT-6142/A, 993S-2 or 993S-10 are not used)
(strain relief required). | 359-0645-660 | NTN | Strain relief, J-2 connector
for all RT-1341(V) or 728U-2, straight. | 359-0637-060 | NTN | Strain
relief, J-2 connector for all RT-1341(V) or 728U-2, right angle. | 359-0637-160 | NTN | Connector, J-3 (coax) mating
for all RT-1341(V) or 728J-2, straight. | 357-9326-000 | NTN | Connector,
J-3 (coax) mating for all RT-1341(V) or 728U-2, right angle. | 357-9363-000 | NTN | Connector, J-4 and J-5 mating
for all RT-1341(V) or 728U-2, straight. (Only required if used with F-1535,
jumper supplied otherwise.) | 357-9292-000 | NTN | Connector,
J-4 and J-5 mating for all RT-1341(V) or 728U-2, right angle. (Only required
if used with F-1535, jumper supplied otherwise.) | 357-9169-000 | | NTN | Connector, J-1
mating for 514A-12/13, straight. | 359-0645-520 | | NTN | RT-1341(V)8 | | | NTN | Connector mating
with J-12 (1553) | 261-0004-010 | | NTN | Connector mating with J-13
(1553) | 261-0004-020 | | NTN | Connector mating
with J-14 | 359-0645-020 | | NTN | Strain Relief for connector
359-0645-020 | 359-0125-110 | NTN | Connector, J-1 (coaxial
cable) mating for CU-2275(V)1/2/3/4/ 5; CU-2314(V)2/3/4; 490A-5 490S-4, 490S-4A
straight. | 357-9326-000 | NTN | Connector,
J-1 (coaxial cable) mating for CU-2314(V)1, straight. | 357-0008-000 | NTN | Connector, J-1 mating for
CU-2275(V)1/2/3/4/ 5; CU-2314(V)2/3/4; 490A-5 490S-4, 490S-4A right angle. | 357-9363-000 | NTN | Connector,
J-1 (coaxial cable) mating for CU-2314(V)1, right angle. | 357-9357-000 | NTN | Connector, J-2 mating for
CU-2275(V)1/2/3/4/5; CU-2314(V)1/2/3/4; 490A-5 490S-4, 490S-4A (strain relief
required). | 359-0645-550 | NTN | Strain
relief, J-2 connector for CU-2275(V)1/2/3; CU-2314(V)1/2/3/4; 490A-5 490S-4,
490S-4A straight. | 359-0637-050 | NTN | Strain relief, J-2 connector
for CU-2275(V)1/2/3; CU-2314(V)1/2/3/4; 490A-5 490S-4, 490S-4A right angle. | 359-0637-150 | NTN | Connector,
J-1 mating for MT-6142/6142A/ MT-6534 & 993S-10 (strain relief required). | 359-0645-180 | NTN | Strain relief, J-1 connector
for MT-6142/6142A/MT-6534 & 993S-10, straight, (right angle increases
vertical clearance) | 359-0637-050 | NTN | Strain
relief, J-1 connector for MT-6142/6142A/MT-6534 & 993S-10, right Angle,
(provides increased vertical clearance). | 359-0637-150 | NTN | Connector,
J-6 and J-7 mating for ECCM controller. | 357-0148-010 |
Mating Connectors, CP-2024(A), CP-2024(B), CP-2024(C) AND 309P-2
NTN | Connector, mates with J-1. | 359-0645-480 | NTN | Strain
relief, for J-1 connector, straight. | 359-0637-050 | NTN | Connector, mates with J-2. | 359-0645-210 | NTN | Strain
relief, for J-2 connector, straight. | 359-0637-060 | NTN | Connector, mates with J-3. | 369-0108-020 | NTN | Cover,
for J-3 with chain. | 372-1820-010 | NTN | Strain relief
for J7 connector, straight (same as for Jl). 309MI - Only | 359-0637-050 | NTN | Connector, J-1 mating for
514A-12/13, straight. | 359-0645-520 | NTN | RT-1341(V)8 | | NTN | Connector mating with J-12
(1553) | 261-0004-010 | NTN | Connector
mating with J-13 (1553) | 261-0004-020 | NTN | Connector mating with J-14 | 359-0645-020 | NTN | Strain
Relief for connector 359-0645-020 | 359-0125-110 |
SUPPORT OFFERINGS
Publications
ARC-190 HF Comm System
Pilot Guide | 523-0774745 | HF-190 HF Comm System
Pilot Guide (514A-9 Control) | 523-0775228 | ARC-190/HF-190
Description and Applications Guide | 523-0774458 | HF Radio Instruction Book (Organizational
Maintenance) | 523-0780584 |
Support OfferingsProduct Information Material is normally available at no charge and
can be obtained by contacting GS Customer Relations:
Phone: 800-321-2223 or (319)-295-5100
Fax: (319)-295-4777
Email: <response@rockwellcollins.com>
Website: http://www.rockwellcollins.com/gs
|
