CareersNewsEvents
Home Our CompanyProducts And SystemsService And SupportInvestor RelationsContact Us
  Home > Product Catalog > Business and Regional > ADF-462
 printable view
Browse by:

Search by:
    Product Index
Product Catalog - Business and Regional
Air Transport  | Business and Regional  | Government  | Service and Support

ADF-462
Automatic Direction Finder
Key Owner/User Benefits |  Overview |  Description |  Typical System |  Specifications |  Selection Guide |  Installation Hardware  |   Product Index  |   Technical Info  |   Training

Click to Enlarge


KEY OWNER/USER BENEFITS
  • Variety of installation options are available and provide both ARINC 429 and CSDB serial tuning capabilities
  • Pro Line II CTL-62 provides diagnostic read-out and CSDB tuning
  • Serial digital outputs offer compatibility with systems on current aircraft as well as systems under development
  • Internal diagnostic routines minimize the time spent on fault diagnostics
  • Wide dynamic range and better resistance to strong signal and intermodulation are provided
  • System tunes the 2182 kHz maritime distress frequency
  • HF comm disable is built in
  • Comprehensive diagnostic capability and convenient mechanical design make it easier to maintain the system
  • Fewer parts, efficient use of input power and careful thermal design add up to a significant increase in reliability
  • Optional ANT-462B reduces installation time and cost when installing a dual system

OVERVIEW

The Pro Line II ADF-462 Automatic Direction Finder is a totally digital ADF system that offers a new level of reliability. Regional airliners and business aircraft including jets, turboprops and helicopters will benefit from this high reliability. The result of extensive use of microprocessors is fewer total parts.


DESCRIPTION

The ADF-462 system consists of an ADF-462 receiver and an integrated loop and sense antenna unit. The ANT-462A antenna is for a single ADF-462 receiver, and the ANT-462B is for dual installations.

The pilot tunes the ADF-462 with a companion control and gets maximum use of all the system's features by using the Pro Line II CTL-62 and a Commercial Standard Data Bus (CSDB). You can also use a control or Flight Management System that uses ARINC 429 serial digital signals to control the radio.

Digital outputs are available on two ARINC 429 ports and two CSDB ports. Each port provides complete output information at all times.

The receiver also provides one analog output that makes it possible to interface directly with an RMI-36 or equivalent radio magnetic indicator.


TYPICAL SYSTEM

ADF-462 Single 
Type Qty Description Part Number 
ADF-462
 
1
 
Receiver, ADF
 
622-7382-101
 
ANT-462A
 
1
 
Antenna, ADF
 
622-7383-001
 
CTL-62
 
1
 
Control, ADF
 
822-2180-007
 

ADF-462 Dual 
Type Qty Description Part Number 
ADF-462
 
2
 
Receiver, ADF
 
622-7382-101
 
ANT-462B
 
1
 
Antenna, ADF
 
622-7384-001
 
CTL-62
 
2
 
Control, ADF
 
822-2180-007
 


Note(s):
See Installation Hardware table for mounts and connectors


SPECIFICATIONS

Certification 
 ADF-462 ANT-462 
FAA TSO
 
C41d (Class A)
 		  
EUROCAE
 
ED-51
 		  
Environmental
 
DO-160B
/A2E1/BB/JY/E2/XXXXXZ/ BZ/AZAAA
 
DO-160B
/A2E1/BC/JY/E2SXXXXX/BZ/ AXXXX
 
EUROCAE
 
ED-14B
 
ED-14B
 

Physical Characteristics 
 ADF-462 ANT-462A ANT-462B 
Size
 
3/8 ATR, short, dwarf
 		    
Height
 
85.4 mm (3.32 in)
 
41.8 mm (1.65 in) at center
 
28.0 mm (1.10 in) at center
 
Width
 
96.6 mm (3.80 in)
 
218.9 mm (8.62 in)
 
271.8 mm (10.70 in)
 
Length
 
354.5 mm (13.96 in)
 
431.8 mm (17.00. in)
 
604.8 mm (23.81 in)
 
Weight
 
1.7 kg (3.7 lb)
 
1.4 kg (3.1 lb)
 
2.3 kg (5.1 lb)
 

Environmental 
 ADF-462 ANT-462A ANT-462B 
Temperature
 
-55 to + 70°C
 
-65 to +71°C
 
-65 to +71°C
 
Altitude
 
70,000 ft
 
70,000 ft
 
70,000 ft
 

Power Requirement 
 ADF-462 ANT-462A ANT-462B 
 
28 V DC 0.6 A, including ANT
 
Powered by ADF-462
 
Powered by ADF-462
 

Frequency 
Control
 
CSDB or ARINC 429
 
Range
 
190.0 to 1799.5 and 2179 to 2185 kHz
 
Tuning Increments
 
500 Hz
 
Capture Range
 
±250 Hz
 

Other Specifications 
Operational Modes
 
ANT, ADF, TONE (BFO/CW)
 
Types of Reception
 
CW, MCW
 
Control
 
CSDB or ARINC 429
 
Output Signals
 		  
 Analog
 
DC sin/cos
 
 Serial Digital
 
CSDB, ARINC 429
 
Audio Output
 
50 mW into 600 ohms
 
Sensitivity
 		  
 ANT
 
70 microamps V/m max at 6 dB (s+n)/n
 
  ADF
 
150 microamps V/m max at 6 dB (s+n)/n
 
 BFO/CW (TONE)
 
190 microamps V/m max at 12 dB (s+n)/n
 
Spurious Response
 
-80 dB
 
Accuracy
 
±3° excluding quadrantal error
 
Loads
 
1 to 5 loads, 1000 ohms each
 

Certification 
 CTL-62G 
FAA TSO
 
C41D
 
ETSO
 
2C41d
 
Environmental
 
DO-160D
[(A2)(F1)X[BBB](RBB1)(SM)(U2FF1)]EXXXXXZ[BZ] AZ[ZC][RR]M[(A3)(J3)3]XXAX
 
EUROCAE
 
ED-51
 

Physical Characteristics 
 CTL-62G 
Height
 
66.68 mm (2.625 in)
 
Width
 
60.32 mm (2.375 in)
 
Length
 
190.92 mm (7.519 in) without mating connector
 
Behind Panel
 
149.2 mm (5.875 in), 176.8 mm (6.96) to end of mating connector shell
 
Weight
 
0.5 kg (1.2 lb)
 

Environmental 
 CTL-62G 
Temperature
 
-30 to 70°C
 
Altitude
 
35,000 ft
 

Power Requirement 
 CTL-62G 
Primary Power
 
28 V DC 250 mA
 
Lighting Power
 
5 V AC/DC, 350 mA, or 28 V DC, 100 mA
 

Display 
 CTL-62G 
Type
 
LCD
 
Brightness Control
 
Automatic or by external potentiometer
 

Digital Data 
 CTL-62G 
Electrical
 
EIA RS-422A
 
Format
 
CSDB
 

Frequency Range 
  
ADF (4 mem) 190.0 to 1799.5 kHz (normal) and 2179 to 2185 kHz (strap option)
 
Channel Spacing
 
500 Hz
 

SELECTION GUIDE

ADF Receivers 
 Interface RMI Output  
Type Analog CSDB 429  Sin/Cos Part Number 
ADF-462
 		  
X
 
X
 
X
 
622-7382-101
 

ADF Antennas 
 Configuration  
Type Single Dual Part Number 
ANT-462A
 
X
 		  
622-7383-001
 
ANT-462B
 		  
X
 
622-7384-001
 

ADF Controls 
 Panel    
 Lighting Color   
Type 5V 28V BL/WH Gray Black Volume Control Dual Part Number 
CTL-62G
 
X
 		  
X
 
X
 		      
822-2180-001
 
    
X
 
X
 
X
 		      
622-2180-001
 
  
X
 		  
X
 		  
X
 		    
622-2180-003
 
    
X
 
X
 		  
X
 		    
622-2180-003
 
  
X
 		  
X
 
X
 		  
X
 		  
622-2180-005
 
    
X
 
X
 
X
 		  
X
 		  
622-2180-005
 
  
X
 		  
X
 		  
X
 
X
 		  
622-2180-007
 
    
X
 
X
 		  
X
 
X
 		  
622-2180-007
 
  
X
 		  
X
 
X
 		    
X
 
622-2180-009
 
    
X
 
X
 
X
 		    
X
 
622-2180-009
 
  
X
 		  
X
 		  
X
 		  
X
 
622-2180-011
 
    
X
 
X
 		  
X
 		  
X
 
622-2180-011
 
  
X
 		  
X
 
X
 		  
X
 
X
 
622-2180-013
 
    
X
 
X
 
X
 		  
X
 
X
 
622-2180-013
 
  
X
 		  
X
 		  
X
 
X
 
X
 
622-2180-015
 
    
X
 
X
 		  
X
 
X
 
X
 
622-2180-015
 

Note(s):
All controls listed above have power on-off capability
 

INSTALLATION HARDWARE

ADF-462 
 Option  
Description A B C D E F  
Application
 		              
 Helicopter
 		        
X
 
X
 		  
  Fixed Wing
 
X
 
X
 
X
 
X
 		      
  
Type Qty Qty Qty Qty Qty Qty Notes Part Number 
Mount
 		            
1
 		  
  UMT-12
 
1
 
1
 		          
622-5212-001
 
  UMT-12
 		        
1
 		    
622-5212-003
 
  390R-19
 		    
1
 
1
 		  
1
 		  
622-1195-301
 
Connector kit
 		                
 With (std) contacts
 
1
 		          
2, 3
 
634-4192-016
 
              
2, 4
 
634-4193-011
 
 Without contacts
 		  
1
 		          
634-1022-001
 
        
1
 		      
634-1899-001
 
          
1
 
1
 		  
634-1899-003
 
Conn (std) contacts
 		  
43
 		  
43
 
43
 
43
 
5
 
372-2514-110
 
Coax insert
 		  
1
 		  
1
 
1
 
1
 		  
372-2519-040
 
Insulator
 		  
2
 		  
2
 
2
 
2
 		  
304-0880-000
 
Ferrule
 		  
2
 		  
2
 
2
 
2
 		  
304-0608-000
 
Grounding spring
 		  
1
 		  
1
 
1
 
1
 		  
634-0102-001
 

Note(s):
  1. The UMT-series is the preferred mount
  2. Includes standard contacts (CPN 372-2514-110) for use with wire having an insulation O.D. of 0.050 in max
  3. Option A consists of all option B items in a single kit
  4. Option C consists of all option D items in a single kit
  5. Standard contacts (CPN 372-2514-110) are for use with wire having an insulation O.D. of 0.050 in max
    Optional contacts (CPN 372-2514-180) are available for use with wire having an insulation O.D. of 0.050 to 0.080 in
 

ANT-462A 
Type Qty Description Part Number 
  
1
 
Connector, mating
 
357-7998-010
 

ANT-462B 
Type Qty Description Part Number 
  
1
 
Connector, mating
 
371-6470-000
 

CTL-62G 
Type Qty Description Part Number 
  
1
 
Connector, mating, crimp
 
359-0305-580
 
  
or
 		    
  
1
 
Connector, mating, solder
 
371-6109-000
 
  
A/R
 
Plate, Dzus, 2.984" H, dual cutout, black
 
634-3569-001
 
  
A/R
 
Plate, Dzus, 2.984" H, dual cutout, gray
 
634-3569-002
 
  
A/R
 
Plate, Dzus, 2.984" H, single cutout, black
 
653-2971-001
 
  
A/R
 
Plate, Dzus, 2.984" H, single cutout, gray
 
653-2971-002
 
  
A/R
 
Plate, Dzus, 3.360" H, single cutout, black
 
653-2972-001
 
  
A/R
 
Plate, Dzus, 3.360" H, single cutout, gray
 
653-2972-002
 
  
A/R
 
Plate, Dzus, 3.360" H, dual cutout, black
 
653-2973-001
 
  
A/R
 
Plate, Dzus, 3.360" H, dual cutout, gray
 
653-2973-002
 

Optional Piggyback Adapter Kits and Connector Cover Kits 
 For use with UMT-Series Mounts For use with 390R-Series Mounts 
 Notes Part Number Notes Part Number 
Piggyback adapt kits w/conn cover
3/8 ATR over 3/8 ATR
 		   
621-9054-002
 
1
 
634-1104-003
 
2
 
621-9054-005
 
Piggyback adapt kits w/o conn cover
3/8 ATR over 3/8 ATR
 		   
618-5281-001
 
1
 
634-1103-003
 		2 
618-5281-002
 
Connector cover kits
3/8 ATR cover kit
 		 
621-8533-002
 		 
621-8533-002
 
3
 
634-4204-002
 
3
 
634-4204-002
 

Note(s):
  1. Piggyback adapters used with UMT-series mounts are suitable for both fixed-wing and helicopters
  2. Special for high-vibration helicopter environments
  3. Special for helicopter installations using the optional floating connector plates
 



Copyright © Rockwell Collins, Inc. All rights reserved. 
Terms of Access  | Privacy Statement  | Cookie Statement  | Contact Us